Work Class R.O.V. L.A.R.S. - Lawson Engineers Ltd

WORK CLASS R.O.V.

LAUNCH & RECOVERY SYSTEM

9500 kg SWL

A compact Launch & Recovery System for R.O.V's designed to take up minimum deck space, ease and speed up mobilization and demobilization, allow road transport on standard 40' articulated vehicles and still provide maximum access to all equipment for operation and maintenance.

The system is for use in a Zone 1 hazardous area and in environmental conditions up to and including sea state 6.

Winch

9500 kg SWL (Top Layer).
Max. speed 30m/min. bottom layer.
3g design load.
Lifting coiler to allow close mounting to A frame whilst still maintaining good cable management.
Direct connection to end of 'A' frame to speed up mobilization (winch need not be welded down).
Open end drum giving space, shelter, and easy access to rotating junction box
Fixed junction box mounted at open end of winch to allow easy access to both J.B's at same time by same man. (ideal for testing).

A-Frame

Adjustable leg lengths for various heights of vehicle and/or outreach.
No disconnection of cylinders during erection to speed up mob/demob.
'A' frame is self erecting to/or from the road transport position using main system pack and controls.
Snubber provides motion damping for R.O.V. both from wave and
A frame motion.

Power Pack

75 kw energy efficient electric motor driven
50/60Hz operation
Power limited swash plate pump
Load sensed to reduce heating & power wastage
c/w integral removeable deck pack for deck testing of R.O.V.
includes auxiliary valves for driving existing ships equipment.

System on board Stena Seawell. Note: Winch is mounted on top of A frame skid
due to restricted deck space. Main power pack is mounted on deck below.

System undergoing 3g tests at Lawson Engineers' premises

LAWSON ENGINEERS LTD
Mechanical Handling Specialists
Tel +44 (0) 1228 711470, Fax +44 (0) 1228 711255
E-Mail : Sales@lawson-engineers.com
http://www.lawson-engineers.com

BACK TO PRODUCTS

HOME

Website produced in association with Adler-Design